[Aspect Ratio]; [Intelligent Iso] - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Press [ ] to display the [REC] mode menu and select the item to set.

[ASPECT RATIO]

i
Setting the aspect ratio of
pictures
By changing the aspect ratio, you can
select an angle of view that matches the
subject.
Select to take pictures with the
same aspect ratio as a 4:3 TV or
a computer monitor.
h
Select to take pictures with the
same 3:2 aspect ratio as 35 mm
film.
This is suitable for landscapes
etc. where a wide view is
preferable.
This is also suitable for playing
back pictures on a wide-screen
j
TV, high-definition TV etc.
• You cannot choose [
picture mode [i].
• The ends of the recorded pictures may
be cut at printing.
Advanced-Shooting
The camera detects the movement of the
subject and then sets the optimal ISO
sensitivity and shutter speed according to
the movement and the brightness of the
subject.
The settings listed below indicates the
selectable highest ISO sensitivity.
ISO MAX400 [MAX] shows the maximum
ISO MAX800
•
•
•
•
] during motion
•
•
- 1 -

[INTELLIGENT ISO]

Changing ISO sensitivity
automatically
OFF Intelligent ISO does not
work.
level of ISO sensitivity.
The ISO sensitivity
ISO MAX
automatically increases up
1250
to the set value.
[ ] displays when you press the shutter
button halfway. If you press it fully, the
shutter speed and ISO sensitivity will be
displayed
Jitter is avoided when taking pictures
indoors of a moving subject by increasing
the ISO sensitivity and making the shutter
speed faster. (However, picture noise will
increase.)
Noise is avoided when taking pictures
indoors of a subject with no movement by
decreasing the ISO sensitivity.
Depending on the brightness and how
fast the subject is moving, jitter may not
be avoided.
– When the moving subject is small
– When the moving subject is at the edge
of the screen
– When the subject starts moving the
instant the shutter button is pressed fully.
To avoid picture noise, we recommend
setting [COLOR MODE] to [NATURAL].
The digital zoom cannot be used.
(P19)