Software Upgrade - RGBlink venus x2 User Manual

C.

Software Upgrade

Upgrade the software by the USB interface in the front panel of VENUS X2, the upgrade
steps are as follows:
1. Copy the ― *.pkg‖ file to the USB disk, and modify the file name to ― _update.pkg‖.
2. Plug into the power cord and make sure the VENUS X2 is in normal operation.
3. Plug the USB disk into the USB interface in the front panel of VENUS X2, the device
will upgrade automatically. The buzzer sounds beeps during upgrade, the beeps will
stop and the USB disk will delete the upgrade file automatically after complete upgrade.
VENUS X2 User Manual 64