Parameters/Address Space; Parameters - Siemens et 200sp User Manual

Parameters/address space

3.1

Parameters

Parameters for the server module
The effective range of the configurable parameter depends on the type of configuration.
Possible configuration: Distributed operation on PROFINET IO in an ET 200SP system.
When assigning parameters in the user program, use the "WRREC" instruction to transfer
the parameter to the module by means of data records, see section Parameter assignment
and structure of parameter data record (Page 19).
The following parameter settings are possible:
Table 3- 1 Configurable parameter and its default (GSD file)
Parameters
Group diagnostics: No
supply voltage L+
Server module (6ES7193-6PA00-0AA0)
Manual, 03/2015, A5E03575337-AB
Range of values Default
No
Disable
•
Enable
•
Reconfiguration in Effective range with configuration
RUN software, e.g., STEP 7 (TIA Portal)
GSD file
PROFINET IO
Yes ET 200SP
3
GSD file
PROFIBUS DP
---
9