Input Data For Interface Modules With Maximum 32 I/O Modules - Siemens et 200sp User Manual

Server module
Hide thumbs Also See for et 200sp:
Table of Contents

Advertisement

3.3.2

Input data for interface modules with maximum 32 I/O modules

Configuration with enabled status detection of the supply voltage L+ (4 bytes of input data)
You can read out the following status for each I/O module of the ET 200SP in the input data
(byte 0 to 3):
● Supply voltage L+ present/missing or I/O module available/not available (4 bytes)
Figure 3-3
Configuration with enabled status detection of the supply voltage L+ and enabled status detection of
the feedback voltage (8 bytes of input data)
You can read out the following status for each I/O module of the ET 200SP in the input data
(byte 0 to 7).
● Supply voltage L+ present/missing or I/O module available/not available (4 bytes)
● Feedback voltage present/missing (4 bytes)
Figure 3-4
Note
• An inserted or missing server module always signals bit=0 for the slot.
• If the server module is missing, the input data is invalid.
• For I/O modules without feedback voltage monitoring, the bit for the feedback voltage is
the same as the bit for the missing supply voltage L+.
Server module (6ES7193-6PA00-0AA0)
Manual, 03/2015, A5E03575337-AB
Supply voltage L+ missing or I/O module not available (4 bytes); feedback voltage not
available
Configuration with enabled status detection of the supply voltage L+ and enabled
status detection of the feedback voltage (8 bytes of input data)
Parameters/address space
3.3 Address space
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents