Priority Scan Setup; Resume Factory Default - AnyTone AT-289G Instruction Manual

BACKGROUND OPERATIONS
the [PTT] key.
Users can enable or disable the VOX function by programming software.

Priority Scan Setup

This transceiver can be set with two priority channels at the same time.Users can set the desired
priority scan by programming software. If transceiver set priority scan, under scanning and receiving
no signal state, it will scan every channel and also test priority channel at a time. When the non-
priority channel receives signal, it will test priority channel according to flyback time A and flyback
time B setup by users.

Resume Factory Default

Once transceiver works abnormally for wrong operations or wrong programming, users can start
this function to resume all functions and channels as Factory Default.
Press [PTT] and [PF1] key synchronously to switch on transceiver. Holding the two keys for more
than 1 second, the transceiver will resume Factory Default after announcing current channel number.
27
Professional
FM Transceiver