Subscribe to Our Youtube Channel
Related Manuals for Moxa Technologies VPort P16-1MP-M12 Series
Summary of Contents for Moxa Technologies VPort P16-1MP-M12 Series
- Page 1 Moxa IP Camera VPort P16-1MP-M12 Series Hardware Installation Guide First Edition, August 2014 2014 Moxa Inc. All rights reserved. P/N: 1802000161010...
-
Page 2: Package Checklist
Overview The rugged VPort P16-1MP-M12 cameras provide an HD (720P, 1280 x 720) video image, and feature an H.264/MJPEG IP dome, giving them the versatility and ruggedness to excel in many different installations and environments for mobile IP video surveillance applications. In addition, the cameras feature EN 50155 compliance, vandal-proofing (EN 62262 IK10), a -25 to 55°C or -40 to 70°C (T models) operating temperature, a rugged M12 Ethernet port, PoE power inputs, IP66 rain and dust... - Page 3 4 Nylock screws (40 mm) for Sticker for camera mounting mounting the VPort P16 on the positions ceiling in a panel mount installation • Quick Installation Guide • Documentation and software CD (includes User’s Manual, Quick Installation Guide, and Utility) •...
- Page 4 • -25 to 55°C (EN 50155, Class T1), or -40 to 70°C (EN 50155. Class TX) operating temperature for rolling stock environments • CE, FCC, UL 60950-1 • Built-in tamper alarm and Video Motion Detection (VMD) • Pre, Trigger, and post snapshot images supported •...
-
Page 5: Bottom View
NOTE The color of the dome cover can be customized based on your installation environment. Contact your Moxa sales representative for information about this customization service. However, keep in mind that the dome cover will decrease the amount of light that can be transmitted into the lens. - Page 6 NOTE The power input rating of the VPort P16-1MP-M12 is 48V/0.35A, and the maximum power consumption is about 5 W. NOTE The equipment is designed for installation inside a building, and is not intended to be exposed to the outdoors. •...
-
Page 7: Hardware Installation
Hardware Installation Step 1: Open and remove the upper case. Use the security Torx to loosen the screws on the top of the camera casing. Step 2: Use the installation sticker for drilling the holes (gray color for panel mounting, green color for flush mounting). Step 3: Place the VPort P16 over the holes Panel Mount Flush Mount... -
Page 8: Software Installation
Step 4: Loosen the screws that fix the horizontal and vertical lens positions. Next, tune the camera lens position, and connect to the VPort P16’s web console to view the video image. After the lens position is correct, fix the screws (5.5 kgf-cm torque is required). Step 5: Fix the top cover to complete the installation. - Page 9 Network Environment with DHCP Server For this network environment, the unit’s IP address will be assigned by the network’s DHCP server. Refer to the DHCP server’s IP address table to determine the unit’s assigned IP address. You may also use the Moxa VPort and EtherDevice Configurator Utility (edscfgui.exe), as described below: Using the Moxa VPort and EtherDevice Configurator Utility...
- Page 10 Step 3: Install the ActiveX Control Plug-in A security warning message will appear the first time you access the VPort’s web-based manager. The message is related to installing the VPort AcitveX Control component on your PC or notebook. Click Yes to install this plug-in to enable the IE web browser for viewing video images.
-
Page 11: Wiring Requirements
Step 5: Access the VPort’s system configuration. Click on System Configuration to access the overview of the system configuration to change the configuration. Model Name, Server Name, IP Address, MAC Address and Firmware Version appear in the green bar near the top of the page. Use this information to check the system information and installation. -
Page 12: Specifications
Dimensions (unit = mm (inch)) Front View Top View Bottom View Specifications Camera Sensor 1/2.7” Progressive CMOS Lens 3.6 and 8 mm fixed focal length Angle of view 3.6 mm, F1.6: Diagonal 120°, Horizontal 96°, Vertical 56° 8.0 mm, F1.8: Diagonal 48°, Horizontal 38°, Vertical 24°... -
Page 13: Physical Characteristics
Video Video Compression H.264 (ISO/IEC 14496-10) or MJPEG Video Output Via Ethernet port Video Streams 3 video streams (2 H.264 and 1 MJPEG) Video Resolution and FPS (Frame per second): NTSC Size Max. FPS Size Max. FPS QCIF 176 x 112 176 x 144 352 x 240 352 x 288... - Page 14 Regulatory Approvals Safety UL 60950-1 FCC Part 15, CISPR (EN 55022) Class A EN 61000-4-2 (ESD), Level 3 EN 61000-4-3 (RS), Level 3 EN 61000-4-4 (EFT), Level 3 EN 61000-4-5 (Surge), Level 3 EN 61000-4-6 (CS), Level 3 EN 61000-4-8 EN 61000-4-11 Rolling Stock EN 50155:2007 compliance (shock, vibration,...
- Page 15 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0 Tel: +886-2-8919-1230 Fax: +49-89-3 70 03 99-99 Fax: +886-2-8919-1231 - 15 -...
Need help?
Do you have a question about the VPort P16-1MP-M12 Series and is the answer not in the manual?
Questions and answers