Ret Button - Panasonic AJ-D900WAP Operating Instructions Manual

RET Button

The images recorded on the VTR or return video signal which has been input to the GENLOCK
IN connector can be seen on the viewfinder screen when the RET (return) button is pressed or
while it is kept pressed in.
What appears on the viewfinder screen differs as shown in the table below depending on the
RET SW setting for setting menu MAIN FUNCTION and the VTR status.
|Note{
When the REC SIGNAL item is set to VIDEO (when recording external input) at the MAIN
FUNCTION page of the setting menu, the external input appears on the viewfinder screen. How-
ever, the camera image appears on the viewfinder screen while the RET button is held down.
È Lens RET button functions
RET switch
Internal VTR mode
setting
REC CHECK Recording
Recording paused
Playing
Playback paused
CAM RET Recording
Recording paused
Playing
Playback paused
MARKF Recording
Recording paused
Playing
Playback paused
FThis is displayed when the Picture Link adaptor board (AJ-YAP900, optional
accessory) has been installed.
– 100 –
Description of what appears
on viewfinder screen
Images shot by camera.
RET button does not function.
What has been recorded
(2-second rec review) can be
checked.
Internal VTR's playback
images.
RET button does not function.
Search operation for
successive shooting.
Return video signal which has
been supplied to GENLOCK
IN connector.
Return video signal which has
been supplied to GENLOCK
IN connector.
Return video signal which has
been supplied to GENLOCK
IN connector.
Return video signal which has
been supplied to GENLOCK
IN connector.
Switch functions as the
MARK switch for the Picture
Link function.
Switch functions as the
MARK switch for the Picture
Link function.
Picture played back by
internal VTR (RET button
does not function).
Still picture played back by
internal VTR (RET button
does not function).