Panasonic AJ-D900WAP Operating Instructions Manual page 55

1) Iris value display
The iris value is displayed when using a lens with the iris value display function.
8
Audio level display
This displays the audio CH1 level.
During sine wave input, the audio level display corresponds roughly to the VTR level
meter display as follows.
Audio Channel 1 Level Display
VTR Level Meter
9
Iris value display
This displays the approximate iris setting (F number).
10
Warning display
This displays the black balance, white balance, auto knee function, super iris, super gain
and other warning displays.
11
Safety zone marker
This indicates the 80% or 90% (setting when shipped from the factory) range for the view-
finder screen area. The screen area percentage is selected at the MARKER page of the
setting menu.
ÁSee "Setting the Marker Displays" (page 58) for a detailed description.
12
Center marker
This indicates the center of the viewfinder screen. This marker is displayed when set to
ON at the MARKER page of the setting menu.
13
Super iris ON display
This indicates that the super iris is ON.
14
MARK1/MARK2 display
If the MARK switch is pressed while the Picture Link function is used, M1 or M2 appears
to indicate the significance of the information concerned. Nothing is displayed when this
function is not required.
15
TCG display
This displays the time code generator value.
-40 -30 -25 -20 -15 -10 -5 0
– 55 –
E