Panasonic AJ-D900WAP Operating Instructions Manual page 106

Setting Menu Screens
SET UP CARD 1/2, 2/2 Screen
These pages set the loading, saving and configuration operations for the setup cards. Align "¢" with the desired item and
press the UP or DOWN button to perform the corresponding processing.
- SE T UP CARD 1 / 2
READ USER D
¢
READ
SE L ECT
WR I T E
SE L ECT
C ARD C ONF G I
- SE T UP CARD 2 / 2 -
I D READ / WR I T E :
¢
FU C 1 ~ 2 R / W N : N
L / M / H SE T R / W : N
L E VE L 1 ~ 6 R / W : N
FFor example, so as not to change the CAMERA ID when reading from, or writing to the SET UP CARD, the ID READ/WRITE
should be selected to OFF.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays
the ENG menu.
-
Item
A T A
READ USER
0
DATA
0
READ
SELECT
WRITE
SELECT
CARD CONFIG
Item
O F F
O
ID READ/WRITE
O
O
FUNC 1x2 R/W
L/M/H SET R/W
LEVEL 1x6 R/W
VF
display
—— USER
ENG
—— USER
ENG
0 . USER
. .
ENG
3
—— USER
ENG
0 . USER
. .
ENG
3
—— USER
ENG
VF
display
ON USER
OFF ENG
ON USER
OFF ENG
ON USER
OFF ENG
ON USER
OFF ENG
– 106 –
Remarks
This is for loading the data contained
in the user area of the camera's
memory.
Setup card data is read.
The file with the camera data which is
to be read from the setup card is
selected.
The camera data is written on the
setup card.
The file on the setup card in which the
camera data is to be written is
selected.
The setup card is formatted.
Remarks
CAMERA ID READ/WRITE is switched
ON or OFF when data is read from or
written on the set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.
READ/WRITE for FUNCTION 1 and
FUNCTION 2 is switched ON or OFF
when data is read from or written on
the set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.
READ/WRITE of gain value for LOW
SETTING, MID SETTING and HIGH
SETTING is switched ON or OFF
when data is read from or written on
the set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.
READ/WRITE for LEVEL 1/6, 2/6, 3/6,
4/6, 5/6 and 6/6 is switched ON or
OFF when data is read from or written
on the set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.