Adjusting The Audio Level - Panasonic AJ-D900WAP Operating Instructions Manual

Adjusting the Audio Level

Manually Adjusting the Audio Level
Limiter
Adjusting the Audio CH1 Level from the Viewfinder
If the AUDIO SELECT CH1/CH2 selector switch is set to AUTO, the input levels of audio CH1
and CH2 are automatically adjusted. If are the level of audio channels 1 and 2 to be manually
adjusted, perform the following operations.
1
Set the AUDIO SELECT CH1/CH2 selector switch to MAN.
2
Turn the AUDIO LEVEL CH1 control at the bottom of the front panel completely to the right.
3
Turn the AUDIO LEVEL CH1/CH2 controls to adjust the audio level so that the level meter
appears up to 0 dB at the maximum volume.
When the audio level is adjusted manually, the limiter circuit operates with respect to excessive
input. Limiter circuit operation can be set to ON and OFF at the setting menu. (The factory set-
ting is OFF.)
The audio CH1 level can be adjusted by the AUDIO LEVEL CH1 control at the bottom of the
front panel while watching the viewfinder.
1
Set the AUDIO SELECT CH1 switch to MAN.
2
Turn the AUDIO LEVEL CH1 control on the side panel completely to the right.
3
Set LEVEL METER on the VF DISPLAY page of the setting menu to ON. The audio level
display appears on the viewfinder screen.
2
4
– 75 –
3
1
2
1