Átime Code-Related Displays - Panasonic AJ-D900WAP Operating Instructions Manual

Time Code-Related Displays
DF SLAVE TCG HOLD
h min s
E TAPE
E BATT
RF SERVO HUMID SLACK
These lamps light to indicate the time code, CTL and real time displays.
DF: This lamp lights during drop frame mode
SLAVE: This lamp lights when the time code is locked to an external source.
HOLD: This lamp lights when the time code generator is held (when the HOLD button is pressed).
WIDE: This lamp lights when a tape is recorded or played back with an aspect ratio of 16:9.
Time counter display: This displays the time code, CTL, user bit and real time.
ÁSee below for the relationship between displayed items and switch settings.
Relationship between the TCG and DISPLAY switch setting positions and the time
counter display
The item displayed in the time counter display is determined by the TCG switch and DISPLAY
switch settings.
Time code-related switch settings and display items
TCG switch DISPLAY switch
position
TC or CTL
SET
UB
CTL
F-RUN or R-RUN TC
UB
WIDE
EMPHASIS
10
frm
F
20
F
30
40
CH1
Displayed item
position
Time code
User bit
CTL
Time code
User bit
– 61 –
0
CH2
dB