Standard Defaults - Datalogic PowerScan PBT9500 Software Reference Manual

The most common configuration settings are listed in the "Default" col-
umn of the table below. Page references are also provided for feature
descriptions and programming bar codes for each parameter. A column
has also been provided for recording of your preferred default settings
for these same configurable features.
Table 16. Standard Defaults
Parameter
ETHERNET HOST INTERFACE ONLY
ETH Standard
DHCP Client
Static IP Address
Subnet Mask
Gateway Address
DNS1 Address
DNS2 Address
Device Name
Data Socket Port
Web Server Security
Web Server Password
Ethernet Software Reference Guide
Default
Host Interface
Enable
192.168.187.31
255.255.255.0
192.168.187.254
0.0.0.0
0.0.0.0
BC9180‐433(910)(BT) [BASE_SERIAL_NUMBER]
51000
Disable
password
Appendix A

Standard Defaults

Your Setting
47