Web Server Password - Datalogic PowerScan PBT9500 Software Reference Manual

Enter/Exit Programming Mode

Web Server Password

This feature will allow you to specify the root account password to be
used when Web Server Security is enabled. This account has all privileges
and can be used to protect the login for key services such as Configura-
tion, Firmware Upgrade or Forcing Reboot.
$CETPW
Set Web Password
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
DEFAULT
26
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by 32
digits (in hex) from the Alphanumeric characters in
Appendix B, Keypad
character(s).
Exit programming mode by scanning the ENTER/
EXIT barcode again.
Default Web Password = password
Web Server Password
representing your desired
~
CANCEL
BC9180™ Base Station/Charger