Datalogic PowerScan PBT9500 Software Reference Manual page 15

Example 1.
BC9180™ is connected to the network with IP address 10.84.30.64
1. Select
2. Click
All the transmitted labels will be shown in a table format with two column
fields.
•
•
3. To stop receiving the label and close the connection to the Web server
4. Click
Ethernet Software Reference Guide
Barcode Data
Connect to the Web server
the base receiver.
Data – contains the received barcode data
Barcode_ID
– a progressive counter updated at every barcode data
transmission
Disconnect from the Web server.
page, click on
OK
to confirm the connection close, or
receiving label page.
from the left menu.
to start receiving barcode data from
Cancel
to return to the
11