Konica Minolta bizhub PRESS C1070P Quick Manual page 89

K
Click [Start].
L
When a message appears, place the
FD-5BT on the white calibration plate,
then click [OK] while holding it down.
NOTICE
When the FD-5BT is placed on the plate, it does not
come into contact with the white calibration plate.
Securely press down. If there is a gap, the default
adjustment will fail.
M
When the message is displayed, click
[OK] to start the measurement.
N
Prepare the printed chart.
- Place five to 10 blank sheets of the same
color under the printed chart so that it will
not be affected by the color of the working
table.
bizhub PRESS C1070/C1070P/C1060/C71hc
bizhub PRO C1060L
5
5-39