Konica Minolta bizhub PRESS C1070P Quick Manual page 100

6.1 Replenish and Replace Consumables
C
Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen
instructions to replace a staple cartridge.
The number on the right-hand side of the help message indicates a replacement procedure. To display
the next step, press [,].
NOTICE
The Saddle Stitcher SD-506 contains two staple cartridges. Check the message, then be sure to pull out the
empty cartridge.
To remove a staple cartridge, securely hold its right and left sides, and pull it out toward you.
To install a staple cartridge, be careful not to mistake the top side for the bottom side. If the top side is facing
down, the staple cartridge cannot be inserted.
6-4