Konica Minolta bizhub PRESS C1070P Quick Manual page 63

I
When entry processing is completed,
press [Adjustment Start].
The entered adjustment values are applied.
If [Back Side Magnification Adjustment] is set to
[OFF], the value of [d] (adjustment value of the
transverse magnification (Horizontal) on the back
side) is not applied.
J
Press Start on the control panel.
A test chart is printed out.
K
Check a gap of the printing position refering the printed out chart.
Repeat steps 7 to 10 until all gaps between the front and back sides are cleared.
L
Press [Exit Print Mode].
bizhub PRESS C1070/C1070P/C1060/C71hc
bizhub PRO C1060L
5
5-13