Listening To Fm/Am Radio; Selecting A Frequency For Reception - Yamaha RX-V1077 Owner's Manual

Listening to FM/AM radio

You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
• The radio frequencies differ depending on the country or region where the unit is
TUNER
being used. The explanation of this section uses a display with frequencies used
in Australia model.
• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM
antennas.
BAND
TUNING
Numeric keys

Selecting a frequency for reception

1
Press TUNER to select "TUNER" as the input
source.
2
Press BAND to select a band (FM or AM).
FM 87.50MHz
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4
IN OUT 1 OUT 2
SLEEP
HD 3
3
Use the following keys to set a frequency.
TUNING: Increase/decrease the frequency. Hold down the
key for about a second to search stations automatically.
Numeric keys: Enter a frequency directly. For example, to
select 98.50 MHz, press "9", "8", "5" and "0" (or ENT).
FM 98.50MHz
STEREO TUNED
"TUNED" lights up when a signal is received from a radio
station.
"STEREO" also lights up when a stereo signal is received.
• "Wrong Station!" appears when you enter a frequency that is out of
reception range.
• You can switch between "Stereo" (stereo) and "Mono" (monaural) for FM
radio reception in "FM Mode" (p.96) in the "Option" menu. When the signal
reception for an FM radio station is unstable, switching to monaural may
improve it.
PLAYBACK ➤ Listening to FM/AM radio
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
VOLUME
L C R
SL SW SR
SBL SB SBR
63
En