MAC Address 1–10
Specifies the MAC addresses (up to 10) of the network devices that will be
permitted access to the unit when "Filter" is set to "On".
■
Procedure
1
Use the cursor keys (q/w) to select "MAC Address 1–5" or "MAC Address
6–10" and press ENTER.
2
Use the cursor keys (q/w) to select an MAC address number and press
ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
To confirm the setting, press ENTER.
5
To save the changes, use the cursor keys to select "OK" and press ENTER.
6
To exit from the menu, press ON SCREEN.
■
Network Name
Edits the network name (the unit's name on the network) displayed on other network
devices.
■
Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the
entry.
• To clear the entry, select "CLEAR".
3
Use the cursor keys to select "OK" and press ENTER.
• To restore the default setting, select "RESET".
4
To exit from the menu, press ON SCREEN.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
117
En