Table of Contents
Advertisement
Item
Function
Adjusts the loss of the presence sound
Liveness
field.
Adjusts the loss of the surround sound
Surround Liveness
field.
Surround Back
Adjusts the loss of the surround back
Liveness
sound field.
Adjust the decay time of the rear
Reverb Time
reverberant sound.
Adjusts the delay between the direct
Reverb Delay
sound and reverberant sound
generation.
Adjusts the volume of the reverberant
Reverb Level
sound.
The following items are available when you select "2ch Stereo" or "7ch Stereo".
Settings
Sound program
0 to 10
Higher to enhance the
2ch Stereo
reflectivity, and lower to
reduce it.
1.0 s to 5.0 s
Higher to enrich the
reverberant sound and lower
to have clear sound.
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
0% to 100%
Higher to strengthen the
7ch Stereo
reverberant sound, and lower
to weaken it.
• Available items in "7ch Stereo" vary depending on the speaker system being used.
CONFIGURATIONS ➤ Configuring sound programs/surround decoders (Sound Program menu)
Item
Function
Selects whether to
automatically bypass the
Direct
DSP circuit when an
analog audio source is
played back.
Level
Adjusts the entire volume. -5 to 0 to +5
Adjusts the front and rear
Front / Rear Balance
volume balance.
Adjusts the left and right
Left / Right Balance
volume balance.
Adjust the height volume
Height Balance
balance using the front
presence speakers.
Enables/disables
Monaural Mix
monaural sound output.
Settings
Auto, Off
-5 to 0 to +5
Higher to enhance the front
side, and lower to enhance
the rear side.
-5 to 0 to +5
Higher to enhance the right
side, and lower to enhance
the left side.
0 to 5 to 10
Higher to enhance the
upside, and lower to
enhance the downside. (The
front presence speakers do
not produce sounds when
"Height Balance" is set to
"0".)
Off, On
103
En
Advertisement
Table of Contents
