Table of Contents
Advertisement
1 2 3 4 5 6 7 8 9 10
ON SCREEN
Cursor keys
ENTER
9
Connect the iOS device to the USB jack, and disable
the screen lock on the iOS device.
The unit (front)
10
Use the cursor keys (e/r) to select "NEXT" and
press ENTER.
11
Tap "Allow" in the message appeared on the iOS
device.
When the connection process finishes, "Completed"
appears on the TV screen.
12
To exit from the menu, press ON SCREEN.
■
B: Using the WPS push button
configuration
You can easily set up a wireless connection with one push of the
WPS button.
• This configuration does not work if the security method of your wireless router
(access point) is WEP. In this case, use other connection method.
1
Press z (receiver power) to turn on the unit.
2
Hold down INFO (WPS) on the front panel for 3
seconds.
"Press WPS button on Access Point" appears on the front
display.
3
Push the WPS button on the wireless router (access
point).
When the connection process finishes, "Completed"
appears on the front display.
If "Not connected" appears, repeat from Step 1 or try
another connection method.
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance,
which allows easy establishment of a wireless home network.
PREPARATIONS ➤ Connecting to a network device wirelessly
48
En
Advertisement
Table of Contents
