Listening To Fm/Am Radio; Setting The Frequency Steps; Fm/Am Tuning - Yamaha r-n602 Owner's Manual

Setting the frequency steps

At the factory, the frequency step setting is set to 50 kHz
for FM and 9 kHz for AM. Depending on your country or
region, set the frequency steps to 100 kHz for FM and 10
kHz for AM.
1
Turn off the unit.
2
When holding down RETURN on the front
panel, press A (power).
A
(power)
DIMMER DISPLAY MODE MEMORY
INPUT BASS TREBLE
PHONES SPEAKERS
A B
5V 1A
3
Rotate SELECT/ENTER to select "TU".
TU••••FM50/AM9
4
Press SELECT/ENTER to select
"FM100/AM10".
5
Press A (power) to set the unit to turn off and
turn it on again.

Listening to FM/AM radio

RETURN
PURE DIRECT
CLEAR BAND PRESET TUNING
VOLUME
BALANCE LOUDNESS SELECT
PUSH - ENTER
FLAT
-30dB
RETURN
CONNECT
L R
SELECT/ENTER

FM/AM tuning

SPEAKERS
A
PHONO
COAX 1 COAX 2
OPT 1
LINE 1
TUNER
TUNER
BAND
BAND
MEMORY
1
Press TUNER to select "TUNER" as the input
source.
2
Press BAND repeatedly to select the
reception band (FM or AM).
3
Press and hold TUNING jj / ii for more than
1 second to begin tuning.
Press ii to tune in to a higher frequency.
Press jj to tune in to a lower frequency.
The frequency of the received station is shown in the
front display.
If a broadcast is being received, "TUNED" indicator
on the front display will be lit. If a stereo broadcast is
being received, the "STEREO" indicator will also lit.
FM 98.50MHz
Frequency
y
• If the station signals are weak, tuning search does not stop at the
desired station.
• When the signal reception for an FM radio station is unstable,
switching to monaural may improve it.
B
SLEEP
BLUETOOTH
OPT 2 CD
LINE 2 LINE 3
NET USB
TUNING jj / ii
TUNING
PRESET
STEREO TUNED
A
VOL.
25
En