Raymarine ST60 Compass Instrument Owner's Handbook Manual page 31

Chapter 3: Installation
3. Referring to the
face upwards on a flat surface and place the rubber keypad (7) in position
around the display window (i.e. so that each key outline is located over its
associated key on the instrument).
4. Snap the low-profile bezel (8) in position over the instrument, so that the rub-
ber keys are correctly located in the holes on the bezel.
Fitting the low-profile bezel
Fitting the low-profile bezel
8
D4537-2
illustration, place the instrument
7 9
D4357-2
19