Locked Condition; Installation Instructions - Bosch Therm 8000 S Installation And Operating Instructions Manual

14 | Installation instructions

Fig. 18 Error code
After following instructions indicated in "Troubleshooting"
section,
▶ press reset button firmly in order to return heater to normal
operation.
Fig. 19 Reset button
If the problem persists, contact your installer.
6 720 680 174 (2014/05)

4.12 Locked condition

This condition is only valid for appliances with one or more
remote controls installed.
Fig. 20 Locked condition
Whenever LCD shows
be adjusted because the appliance is in use by a user which
already selected a different temperature. Appliance will be
automatically unlock 5 minutes after closing hot water tap.
5 Installation instructions
DANGER: Explosion
▶ Always close the gas valve before doing
any work in gas components.
The installation, the electric connection, the
gas installation, the installation of the
exhaustion / admission conducts, as well as
the start up must be carried out by a qualified
technician.
The appliance can only be used in the
countries mentioned in the type plate.
CAUTION:
▶ Do not install the appliance where the
inlet water temperature is superior to
60 °C. In such cases we recommended
the installation of a mixer's valve in the
entrance of the appliance as prevention
measure.
6720608920-33.1AL
the temperature setting cannot
Therm 8000S