Filling The Condensate Trap - Bosch Therm 8000 S Installation And Operating Instructions Manual

20 | Installation instructions
5.9.2 Installation of the exhaustion accessory Ø 80mm
To install the accessory of the exhaustion accessory, proceed
as follow;
▶ Put the gasket between the appliance and the accessory
Fig. 30, [1].
▶ Tighten the 3 screws of the exhaustion accessory Fig. 30,
[2].
2.
Fig. 30
5.9.3 Installation of the concentric accessory - Ø80/125
mm
To install the concentric accessory, proceed as follow;
▶ Put the blue gasket provided with the appliance between the
appliance and the accessory.
6 720 680 174 (2014/05)
▶ Tighten the 3 screws of the concentric accessory.
2.
2.
1.
Fig. 31 Concentric accessory
[1] Concentric accessory
[2] Accessory 8 705 507 042

5.10 Filling the condensate trap

6720608920-25.1AL
DANGER:
Before the first start up of the appliance,
after a long period of inactivity or whenever
it proceeds to the cleaning of the
condensate trap;
▶ Fill the condensate trap with water, to
prevent that the exhaustion gases enter
in the division where the appliance is
installed.
The condensate trap can be filled before or
after connecting the vent pipe.
1
2
6720680174-06.1Av
Therm 8000S