Operation instructions
Fig. 55
After following instructions indicated in "Troubleshooting"
section,
▶ press reset button firmly in order to return heater to normal
operation.
Fig. 56
Reset button
If the problem persists, contact your installer.
6.8
Program button
Fig. 57
"Program" key
6.8.1 Memorizing selected temperature
▶ Press buttons
+
or
▶ Hold "Program" button for 3 seconds to save temperature.
When LCD stops blinking, temperature is saved in memory.
Using "Program" function
In order to select memorized temperature
▶ Press "Program" key.
50
to select desired temperature.
LCD shows pre-memorized temperature, which is now the hot
water selected temperature.
6.9
Locked condition
This condition is only valid for appliances with one or more
remote controls installed.
Fig. 58
Locked condition
Whenever LCD shows
be adjusted because the appliance is in use by a user which
already selected a different temperature. Appliance will be
automatically unlock 5 minutes after closing hot water tap.
940 ES – 6 720 644 930 (2019/09)
, the temperature setting cannot