Syncing With Lifestream - Honeywell Genesis Touch Getting Started

Hide thumbs Also See for Genesis Touch:

Table of Contents

Getting Started

Syncing with LifeStream

The Genesis Touch can be configured for patient use from LifeStream (recommended) as well as from the

monitor. When you attempt to exit the General Settings screen, you will be prompted to sync the with

LifeStream. If you answer Yes to this question, the configuration changes you made at the monitor will be

uploaded to LifeStream and will overwrite any pending configurations in LifeStream. If you do not want

the configuration from the monitor to overwrite the pending LifeStream configuration, you must answer

No to this question.

1. A window similar to the following appears:

To:

Sync with LifeStream

(overrides the current

or pending

configuration in

LifeStream for this

monitor.)

Not sync with

LifeStream

P4810EN.05

Select:

Yes. A screen similar to the following appears as the information is provided

to LifeStream:

When the information is received, a screen similar to the following appears:

No. The Setting screen appears. You will now use the configuration

provided by LifeStream rather than what you set up on the monitor.

6/9/14

Table of Contents