Honeywell Genesis Touch Getting Started page 25

Hide thumbs Also See for Genesis Touch:

Table of Contents

4. Select Device. The Device button is highlighted:

5. Select the Power button on the pulse oximeter to turn it on and/or place the oximeter on the middle

finger of your left hand like you would to take a reading with the Genesis Touch (shown below).

6. Select the No Device Paired check box. A Pulse Oximeter screen similar to the following appears and

begins searching for all pulse oximeters in the area. One or more oximeters may appear depending on

your location. For best results, always pair away from other Bluetooth devices:

7. Compare the number on the bottom of the oximeter (or where the finger is placed for a Contec

oximeter) to the numbers displayed on the screen. See below for an example of what you may see on

your screen, depending on the type of oximeter you are pairing with:

Nonin Onyx® II 9560 Pulse Oximeter

Contec CMS 50E Pulse Oximeter

ChoiceMed MD300C318T Pulse Oximeter

6/9/14

Pairing an Oximeter

Nonin-NONIN 673038

Contec CONTEC-CE0490

Choicemmed BCOXM-115203371

P4810EN.05

Table of Contents