Table of Contents
Advertisement
Getting Started
4. Select Patient to enable the patient to enter their temperature manually. A screen similar to the
following appears:
Note:
We recommend that you pair all devices first, then set up the acquisition schedule for all
devices for a patient. However, if you want to set up the acquisition schedule for the scale at
this time, you can. Refer to Scheduling for more information
5. Press the back icon. The Peripherals screen appears showing that Patient Entered is set for the
thermometer
24
P4810EN.05
©
2014 Honeywell HomMed. All rights reserved.
6/9/14
Advertisement
Table of Contents
