Table of Contents
Advertisement
Getting Started
Pairing a HomMed or NCI Technology Scale
Before you can use these bluetooth scales, you need to pair one with the Genesis Touch monitor. Refer to
Configuring the Scale Type for more information.
1. Power up the HomMed scale by either inserting batteries or plugging the AC adapter into an electrical
outlet and into the scale connector under the scale handle.
2. From the General Settings screen, select Peripherals. A Peripherals screen similar to the following
appears:
Note:
To add peripherals select (
3. Select Scale:
4. A Scale screen similar to the following appears:
10
P4810EN.05
). Refer to Before You Begin for more information.
©
2014 Honeywell HomMed. All rights reserved.
6/9/14
Advertisement
Table of Contents
