Honeywell Genesis Touch Getting Started page 16

Hide thumbs Also See for Genesis Touch:

Table of Contents

Getting Started

8. Select the check box next to the scale with which you want to pair. A series of windows will quickly

appear as the devices pair with each other, until the Genesis Touch returns to this screen:

Note:

We recommend that you pair all devices first, then set up the acquisition schedule for all

devices for a patient. However, if you want to set up the acquisition schedule for the scale at

this time, you can. Refer to Scheduling for more information.

9. Press the back icon. The Peripherals screen appears with the serial number of the scale that has been

paired listed:

Note:

Different peripherals will appear depending on what has been assigned.

P4810EN.05

6/9/14

Table of Contents