Pairing An A&D Scale - Honeywell Genesis Touch Getting Started

Pairing an A&D Scale
Before you can use an A&D Bluetooth scale:
• Insert four AA batteries.
• Set the switch on the bottom of the scale to WEIGHT B (second from left for kg). Refer to the
manufacturer's document that came with your scale for more information.
• Configure the Genesis Touch monitor to use the A&D scale. Refer to Configuring the Scale Type for
more information.
To pair an A&D scale:
1. From the General Settings screen, select Peripherals. A Peripherals screen similar to the following
appears:
2. Select Scale. The Scale row is highlighted:
6/9/14
©
2014 Honeywell HomMed. All rights reserved.
Pairing an A&D Scale
P4810EN.05 13