Honeywell Genesis Touch Getting Started page 26

Hide thumbs Also See for Genesis Touch:

Table of Contents

Getting Started

8. Select the oximeter that you want to pair with. A series of Bluetooth Pairing Request windows

appears, and finally a check mark appears next to the oximeter that the monitor is paired with:

Note:

We recommend that you pair all devices first, then set up the acquisition schedule for all

devices for a patient. Refer to Scheduling for more information.

If pairing

Then:

is:

Successful 1. Press the back icon. The Peripherals screen appears with the serial number of the

oximeter that has been paired listed:

2. Go to the next peripheral device you want to configure.

Not

1. Press the back icon. The Pulse Oximeter screen appears.

Successful

2. Go to step 4 of Pairing an Oximeter and try again.

P4810EN.05

6/9/14

Table of Contents