Table of Contents
Advertisement
Configuring for Manually-Entered Temperature
Configuring for Manually‐Entered Temperature
If your patient will be manually reporting a temperature, you must configure it for use. The thermometer
reading is done through manual entry only, so no pairing is involved.
To configure the thermometer for use:
1. From the General Settings screen, select Peripherals. A Peripherals screen similar to the following
appears:
2. Select the add icon (
). A screen similar to the following appears:
3.
Select Thermometer. A screen similar to the following appears:
©
6/9/14
2014 Honeywell HomMed. All rights reserved.
P4810EN.05
23
Advertisement
Table of Contents
