Receiving A Message - Panasonic KX-TG6481FX Operating Instructions Manual

TG6481FX(e).book Page 32 Friday, June 5, 2009 8:50 AM
SMS (Short Message Service)

Receiving a message

When an SMS message is received:
– "Receiving SMS Message" is
displayed.
– a tone is heard (if the handset ringer is
turned on).
– h is displayed with the total number
of new (unread) SMS messages.
Reading a received message
1
K (middle soft key)
2
{V}/{^}: "SMS" i M
3
{V}/{^}: "Receive List" i M
4
{V}/{^}: Select a message.
L Messages which have already
been read are indicated by a "Q",
even if they were read using
another handset.
L To erase a message, press W.
i {V}/{^}: "Yes" i M
5
Press M to read the message
content.
Note:
L To call the message sender, press
{C}.
Replying to a message
1
While reading a received message,
press K.
2
{V}/{^}: "Reply" i M
3
Enter a message (page 44). i
M
4
Edit the destination phone number if
necessary. i M
5
Continue from step 6, "Writing and
sending a new message", page 31.
32
Editing/forwarding a message
1
While reading a received message,
press K.
2
{V}/{^}: "Edit Message" i M
3
Continue from step 4, "Writing and
sending a new message", page 31.
Erasing received messages
1
While reading a received message,
press K.
2
{V}/{^}: "Erase" i M
L To erase all messages, select
"Erase All". i M
3
{V}/{^}: "Yes" i M i {ic}
Storing the sender's number
in the phonebook
1
While reading a received message,
press K.
2
{V}/{^}: "Add Phonebook" i
M
3
To store the name, continue from
step 3, "Adding entries", page 19.
Editing the sender's number
before calling back
1
While reading a received message,
press K.
2
{V}/{^}: "Edit and Call" i
M
3
Edit the number. i {C}