Table of Contents
Advertisement
TG6481FX(e).book Page 51 Friday, June 5, 2009 8:50 AM
SMS (Short Message Service)
Problem
The SMS message centre
number is logged in the caller
list and the message is not
received.
I cannot send or receive SMS
messages.
"FD" is displayed.
"FE" is displayed.
"E0" is displayed.
"Q" is not displayed after I read
a message.
Useful Information
Cause/solution
L Someone tried to send you a message while
SMS is turned off. Turn it on (page 30).
L You have not subscribed to the appropriate
service. Contact your service provider/
telephone company.
L The SMS message centre number(s) are not
stored or are incorrect. Store the correct
numbers (page 30).
L Message transmission was interrupted. Wait
until the message has been sent before using
other telephone functions.
L If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L The unit could not connect to the SMS
message centre. Confirm that the correct
SMS message centre numbers are stored.
Confirm that SMS is turned on (page 30).
L An error occurred while sending the message.
Try again.
L Your phone number is permanently withheld
or you have not subscribed to the appropriate
service. Contact your service provider/
telephone company.
L When an error code ("FD", "FE", or "E0") is
displayed, "Q" will not be displayed even if
you have read the message.
51
Advertisement
Table of Contents
