Table of Contents
Advertisement
TG6481FX(e).book Page 48 Friday, June 5, 2009 8:50 AM
Useful Information
Problem
I do not know how to erase y
(Missed call) from the display.
Programmable settings
Problem
I have changed the display
language to a language I
cannot read.
While programming, the
handset starts to ring.
While programming, the
display returns to standby
mode.
I cannot register a handset to a
base unit.
48
Cause/solution
L There are unviewed missed calls remaining.
View them and erase y in the following way.
1
K (middle soft key)
2
{V}/{^}: "Caller List" i M
3
Press {V} to search from the most recent
call, or press {^} to search from the oldest
call.
Cause/solution
L Change the display language.
If you select a language you cannot read:
{ic} i K i {^} 3 times i
M i {V} 2 times i M 2 times i
{V}/{^}: Select your desired language. i
M i {ic}
L A call is being received. Answer the call and
start again after hanging up.
L A call matching an entry in the call barred list
is being received. Wait and try again later.
L The maximum number of handsets (6) is
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 27).
L You entered the wrong PIN. If you forget your
PIN, contact your nearest Panasonic service
centre.
L Place the handset and the base unit away
from other electrical appliances.
Advertisement
Table of Contents
