Receiving A Message - Panasonic KX-TCD220G Operating Instructions Manual

TCD220G(e-g).book Page 36 Thursday, January 20, 2005 11:43 AM
SMS (Short Message Service)
5
Press {e} or {v} repeatedly to select the
message, then press {j/OK}.
6
Press {j/OK}, select "Löschen", then
press {>}.
L To erase all messages in the selected
mailbox, select "Alle löschen", then
press {>}.
7
Select "Ja", then press {>}.
8
Press {ih}.
For Austrian users
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Absendeliste", then press {>}.
4
Press {e} or {v} repeatedly to select the
message, then press {j/OK}.
5
Press {j/OK}, select "Löschen", then
press {>}.
L To erase all messages, select "Alle
löschen", then press {>}.
6
Select "Ja", then press {>}.
7
Press {ih}.

Receiving a message

When an SMS message is received:
– a tone is heard (if the ringer is turned off, this
tone is not heard)
– "Empfange SMS-Nachricht" is displayed
– F is displayed
Reading a received message
For German users
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Allgemein", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
L If a mailbox contains new (unread) SMS
messages, "@" is displayed next to the
total number of messages for that mailbox.
4
Select "Empfangsliste", then press {>}.
36
5
Press {e} or {v} repeatedly to select a
message.
L Messages which have already been read
are indicated by a "Q", even if they were
read using another handset.
6
Press {j/OK} to read the message
content.
Hinweis:
L To call the message sender, press {C} or
{s}.
L If "SMS-Speich voll" is displayed, new
SMS messages cannot be received. Erase
unnecessary messages (Seite 35, 37).
L If you receive a message from a party saved in
the handset phonebook, the stored name is
displayed.
L Some SMS service providers attach a 1-digit
number to the message sender's phone
number, and sender names stored in the
handset phonebook may not be displayed as a
result.
For Austrian users
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Empfangsliste", then press {>}.
4
Press {e} or {v} repeatedly to select a
message.
L Messages which have already been read
are indicated by a "Q", even if they were
read using another handset.
5
Press {j/OK} to read the message
content.
Hinweis:
L To call the message sender, press {C} or
{s}.
L If "SMS-Speich voll" is displayed, new
SMS messages cannot be received. Erase
unnecessary messages (Seite 35, 37).
L If you receive a message from a party saved in
the handset phonebook, the stored name is
displayed.
L Some SMS service providers attach a 1-digit
number to the message sender's phone
number, and sender names stored in the