For Optional Multi-Unit Users
Selecting the Standby Mode Display
You can choose whether to display the currently connected base unit number, handset number or no
display while in the standby mode. The factory preset is the base unit number.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
1
Press
.
2
Press
or
to "Setting Handset", then press
.
3
Press
or
to "Display Option", then
press
.
4
While "Standby Display" is at the
arrow, press
The current setting is at the arrow.
5
Press
or
Number", "Handset Number" or
"OFF".
6
Press
.
A beep sounds.
64
until the arrow points
until the arrow points
.
to select "Base
7
Press
to return to the standby
mode.
Ex. "Base Number" is selected.
B a s e 1
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
Ex. "Handset Number" is selected.
I N T . 1
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
Ex. "OFF" is selected.
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0