Bell Selection - Panasonic KX-TCD715ALM Operating Instructions Manual

For Optional Multi-Unit Users

Bell Selection

There are three choices for bell selection.
When a call is being received:
— all handsets ring. "All handsets"
— the selected handset(s) ring(s). "Specified handset(s)"
— the selected handset rings first, then if it does not answer, all other handsets will ring. "First
handset"
The factory preset is "All handsets". To change the bell selection, program as follows.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
Selecting specified handset(s)
You can choose which handset(s) you want to ring.
1
Press .
2
Press or
to "Setting Base", then press
"Input Command" is displayed.
3
1
Press .
4
Enter the 4-digit base unit PIN (p. 55).
The current setting is displayed.
1: All handsets
2: Specified handset(s)
3: First handset
5
2
Press .
The current registered handset number(s)
is/are displayed.
I n p u t C o m m a n d
1 2 - 1 2 3 4 5 6
62
until the arrow points
6
Enter the handset number(s) you want to
ring.
The selected handset number(s) flash(es).
. If you misdial, press the number(s) again.
7
Press
A beep sounds.
To return to the standby mode, press
.
.