Table of Contents
Advertisement
To enter names selecting characters
The dialling buttons can be used to enter letters and character symbols. The letters are printed on the
dialling buttons. Pressing each button selects a character as shown on page 34, 35.
To change the character mode
You can select one of 6 character modes by pressing
The factory preset is "ABC".
1
Press
while entering a name.
2
Press
or
to the desired character mode, then press
The character mode is displayed.
ABC: Alphabet (Capital/lower
0–9: Numeric
*
To change from capital to lower case, press
For example, to enter "Anne":
1.
2
Press
.
2.
6
Press
, then
3.
6
Press
, then
4.
3
Press
TWICE.
If you make a mistake while entering a name
Press
or
to move the cursor to the incorrect character, press
correct character. Pressing
press and hold
.
C
until the arrow points
*
)
: Greek
TWICE.
TWICE.
erases the character to the left of the cursor. To erase all characters,
C
during entering a name.
.
H ABC
0—9
: Extended 2 (Capital/lower
AÄÅ: Extended 1 (Capital/lower
. Each time you press
A
An
Ann
Anne
C
< E n t e r N a m e >
: Russian
*
)
*
)
, the mode will change.
to delete, and enter the
33
Advertisement
Table of Contents
