Selecting The Standby Mode Display - Panasonic KX-TCD715EM Operating Instructions Manual

KX-TCD715EM-8Multi 01.7.19 2:15 PM
For Optional Multi-Unit Users

Selecting the Standby Mode Display

You can choose whether to display the currently connected base unit number, handset number or no
display while in the standby mode. The factory preset is the base unit number.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
1
Press .
2
Press or
to "Setting Handset", then press
.
3
Press or
to "Display Option", then
press .
4
While "Standby Display" is at the
arrow, press
• The current setting is at the arrow.
5
Press or
Number", "OFF" or "Base Number".
6
Press .
• A beep sounds.
64
Page 64
until the arrow points
until the arrow points
.
to select "Handset
7
Press to return to the standby
mode.
Ex. "Handset Number" is selected.
I N T . 1
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
Ex. "OFF" is selected.
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
Ex. "Base Number" is selected.
B a s e 1
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0