Table of Contents
Advertisement
Using the Phonebook
Editing an Item in the Phonebook
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
1
Press
The first item is displayed.
2
Press
or
is displayed, then press
You can also search for the item by initial
(p. 37).
H Edit
C l e a r
R e g . T o H o t K e y
3
While "Edit" is at the arrow, press
If you do not need to change the name,
go to step 5.
4
Edit the name using the dialling buttons,
,
or
5
Press
.
If you do not need to change the number,
go to step 7.
Clearing an Item from the Phonebook
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
1
Press
The first item is displayed.
2
Press
or
is displayed.
You can also search for the item by initial
(p. 37).
3
Press
.
4
Press
or
to "Clear", then press
"Clear ?" is displayed.
38
to enter the phonebook.
until the desired name
.
C
up to 16 characters.
to enter the phonebook.
until the desired item
until the arrow points
.
6
Edit the number using the dialling
buttons
Pressing
the cursor. To erase all digits, press and
C
hold
.
7
Press
8
Press
category number (1–9) or OFF, then
press
9
While "Save" is at the arrow, press
.
A beep sounds and "Saved" is displayed.
To return to the standby mode, press
5
Press
press
A beep sounds and "CLEARED" is
displayed.
After a few seconds, the display will show
the next item.
To return to the standby mode, press
.
,
or
C
.
C
erases the digit to the left of
.
or
to select the desired
.
or
to select "YES", and
.
.
.
Advertisement
Table of Contents
