Cancelling A Handset - Panasonic KX-TCD715ALM Operating Instructions Manual

Cancelling a Handset

Each handset can cancel itself or another handset.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
1
Press .
2
Press or
to "Setting Base", then press
"Input Command" is displayed.
3
Press 7 .
4
Enter the 4-digit base unit PIN (p. 55).
The current registered handset No. is/are
displayed.
Cancelling a base unit
If another handset is out of range and/or its power is OFF when "Cancelling a Handset", the previous
base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base
unit registered in the cancelled handset.
1
Press .
2
Press or
"Setting Handset", then press
3
Press or
"Registration", then press
4
Press or
"Cancel Base", then press
"Enter H/set PIN" is displayed.
5
Enter the 4-digit handset PIN (p. 55).
Registered base unit(s) is(are) displayed.
until the arrow points
.
until the arrow points to
.
until the arrow points to
.
until the arrow points to
.
5
Enter the handset number you want to
cancel.
The selected handset number(s) flash(es).
Ex. The handset No. 5 is selected.
I n p u t C o m m a n d
7 1 2 3 4 5 6
If you misdial, press the number(s) again.
6
Press .
A beep sounds.
To return to the standby mode, press
.
6
Press or until the arrow points
to the base unit(s) you want to cancel,
then press .
" " marks the selected base unit.
7
Press .
"Clear ?" is displayed.
8
Press or to select "YES" , then
press .
A beep sounds and "CLEARED" is
displayed.
To return to the standby mode, press
.
61