Bell Selection - Panasonic KX-TCD955EC Operating Instructions Manual

Bell Selection

There are three choices for bell selection.
When a call is being received:
— all handsets ring. "All handsets"
— the selected handset(s) ring(s). "Specified handset(s)"
— the selected handset rings first, then if it does not answer, all other handsets will ring. "First
handset"
The factory preset is "All handsets". To change the bell selection, program as follows.
Selecting specified handset(s)
You can choose which handset(s) you want to ring.
1
Press .
F
Press G or F until the arrow points to
2
"Program".
3
OKH
Press
Press G or F until the arrow points to
4
"Setting Base".
5
OKH
Press
"Input Command" is displayed.
6
1
Press .
7
Enter the base unit password (p. 35).
The current setting is displayed.
1: All handsets
2: Specified handset(s)
3: First handset
8
2
Press .
The current registered handset number(s)
is/are displayed.
I n p u t C o m m a n d
1 2 - 1 2 3 4 5 6
48
.
.
9
Enter the handset number(s) you want to
ring.
The selected handset number(s) flash(es).
If you misdial, press the number(s) again.
10
OKH
Press .
A confirmation tone sounds.
The display will return to "Setting
Base". To return to the stand-by mode,
press or wait for 60 seconds.
C
You can exit the programming mode any time
by pressing C .