Technical Parameters Of I/O Port; Technical Parameters Of Power Over Ethernet (Poe); Characteristics Of Inputs; Poe Pd: Parameters For Opposite Pse - Advantech SmartMotion ST355 User Manual

7.7 Technical parameters of I/O port

Characteristics of inputs:

logical 0 / 1
log. 1 max
log. 0 min
log. 0 type
log. 0 max
The binary input status in the Shell returned via io get bin0 or io get bin1.
Binary output parameters:
– 60 V AC / 300 mA
– 60 V DC / 300 mA

7.8 Technical Parameters of Power over Ethernet (PoE)

Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling
needed is Category 5, up to 12.5 . It is possible to use a passive PoE injector.

PoE PD: parameters for opposite PSE

Input voltage range
Power available
Maximum current
Table 26: PoE PD: parameters for opposite PSE

PoE PSE parameters

Power supply needed
Power available
Voltage Current
3 V 0.4 mA
5 V 0.7 mA
12 V 2 mA
60 V 7 mA
Table 25: Characteristics of inputs
42.5 – 57 V
25.50 W
600 mA
44 – 57 V, 65 W
2x 25.50 W (ETH0, ETH1)
Table 27: PoE PSE parameters
34
7. TECHNICAL PARAMETERS
Web interface status
Off
On
On
On