Bosch ISC-FPB1-W60QS Installation And Operation Manual page 15

Photobeam 5000
4
Figure 4.2: Wiring for one set on the run
Callout ﹘ Description
1 ー Power output
2 ー Transmitter
3 ー Receiver
1
5
4
Figure 4.3: Wiring for two sets on a single run
Callout ﹘ Description
1 ー Power output
2 ー Transmitter
3 ー Receiver
Notice!
The BH12T heater is an optional device. Refer to the BH12T installation instructions (P/N: W.
97.2195) for more information.
Bosch Security Systems, Inc.
1
5
4
2
3
Installation and Operation Guide
3
Callout ﹘ Description
4 ー Control panel
5 ー Alarm input. The COM and NC terminals
on the unit are the outputs, they connect to a
control panel input.
2
3
Callout ﹘ Description
4 ー Control panel
5 ー Alarm input. The COM and NC terminals
on the unit are the outputs, they connect to a
control panel input.
Wiring | en 15
2
2016.02 | 03 | F.01U.305.910