Supermicro 6038R-DE2CR16L User Manual page 65

S S S
UPER TORAGE YSTEM 6038R-DE2CR16L User's Manual
Authorized Signatures
Delete DB (DataBase)
Select <Yes> to confirm deletion of a database from the NVRAM (Non-Volatile
RAM).
Set New DB (DataBase)
Select <Yes> to confirm that a new database will be set in the NVRAM (Non-Volatile
RAM).
Append DB (DataBase)
Select <Yes> to load the new database from the manufacture defaults. Select <No>
to load the new database from other sources.
Authorized TimeStamps
Delete DBT (DataBase Timer)
Select <Yes> to confirm deletion of the database timer from the NVRAM (Non-
Volatile RAM).
Set New DBT (DataBase Timer)
Select <Yes> to confirm that the new database timer will be set in the NVRAM
(Non-Volatile RAM).
Append DBT (DataBase Timer)
Select <Yes> to load the new database timer from the manufacture defaults. Select
<No> to load the new database timer from other sources
Forbidden Signatures
Delete DBX
Select <Yes> to confirm deletion of the DBX files from the Non-Volatile RAM
(NVRAM).
Set New DBX
Select <Yes> to confirm that the new DBX files will be downloaded to the Non-
Volatile RAM (NVRAM).
Append DBX (DataBase Timer)
Select <Yes> to load the new DBX files from the manufacture defaults. Select <No>
to load the new DBX files from other sources.
7-38
7-7 Boot Settings
This submenu allows the user to configure Boot settings for this system:
Boot Configuration
Setup Prompt Timeout
Use this item to set the number of seconds for the system to wait until the setup
key is activated. Enter 65535 (0xFFFF) to wait indefinitely.
Boot Mode Select
Use this item to select the type of device to be used for system boot. The options
are Legacy, UEFI, and Dual.
Fixed Boot Order Priorities
This option prioritizes the order of bootable devices from which the system will boot.
Press <Enter> on each entry from top to bottom to select devices.
•
When the item above -"Boot Mode Select" is set to Dual (default), the following
items will be displayed for configuration:
Boot Option #1 - Boot Option #15
•
When the item above -"Boot Mode Select" is set to Legacy, the following items
will be display for configuration:
Boot Option #1 - Boot Option #7
•
When the item above -"Boot Mode Select" is set to UEFI, the following items
will be display for configuration:
Chapter 7: BIOS
7-39