Supermicro 6038R-DE2CR16L User Manual page 49

Super storage system
Table of Contents

Advertisement

S
S
S
UPER
TORAGE
YSTEM 6038R-DE2CR16L User's Manual
AC Loss Policy Depend On
Select BIOS for the AMI BIOS to set the AC power loss policy. Select IPMI for the
IPMI to set the AC power loss policy. The options are IPMI and BIOS.
Restore on AC Power Loss
Use this feature to set the power state after an AC power outage. Select Power
Off for the system power to remain off after a power loss. Select Power On for the
system power to be turned on after a power loss. Select Last State to allow the sys-
tem to resume its last power state before a power loss. The options are Power On,
Stay Off, and Last State.
CPU Configuration
This submenu displays the following CPU information as detected by the BIOS. It
also allows the user to configure CPU settings.
Processor Socket
Processor ID
Processor Frequency
Processor Max Ratio
Processor Min Ratio
Microcode Revision
L1 Cache RAM
L2 Cache RAM
L3 Cache RAM
CPU1 Version
CPU2 Version
Clock Spread Spectrum
Select Enable to allow the BIOS to attempt to reduce the level of Electromagnetic
Interference caused by the components whenever needed. The options are Dis-
able and Enable.
7-6
Hyper-Threading (All)
Select Enable to support Intel's Hyper-threading Technology to enhance CPU per-
formance. The options are Enable and Disable.
Cores Enabled
This feature allows the user to determine the number of CPU cores to be enabled.
Enter "0" to enable all cores. The default setting is 0, which enables all CPU cores
in the system.
Execute Disable Bit (Available if supported by the OS & the CPU)
Select Enable to support Execute Disable Bit Technology, which will allow the
processor to designate areas in the system memory where an application code
can execute and where it cannot, thus preventing a worm or a virus from flooding
illegal codes to overwhelm the processor to damage the system during an attack.
The options are Enable and Disable. (Refer to Intel's and Microsoft's websites for
more information.)
PPIN Control
Select Unlock/Enable to use the Protected-Processor Inventory Number (PPIN)
control in the system. The options are Unlock/Enable and Unlock/Disable.
Hardware Prefetcher (Available when supported by the CPU)
If set to Enable, the hardware prefetcher will prefetch streams of data and instruc-
tions from the main memory to the L2 cache to improve CPU performance. The
options are Disable and Enable.
Adjacent Cache Prefetch (Available when supported by the CPU)
Select Enable for the CPU to prefetch both cache lines for 128 bytes as comprised.
Select Disable for the CPU to prefetch both cache lines for 64 bytes. The options
are Disable and Enable.
Note: Please reboot the system for changes on this setting to take effect.
Please refer to Intel's website for detailed information.
DCU (Data Cache Unit) Streamer Prefetcher (Available when supported by
the CPU)
If set to Enable, the DCU Streamer prefetcher will prefetch data streams from the
cache memory to the DCU (Data Cache Unit) to speed up data accessing and
processing to enhance CPU performance. The options are Disable and Enable.
7-7
Chapter 7: BIOS

Advertisement

Table of Contents
loading

Table of Contents