Reinstalling The System Board Access Cover - IBM infoprint 1764 User Manual

Reinstalling the system board access cover

1
Align the slots at the top of the access cover with the screws near the top of the printer.
2
Slide the cover up under the top cover lip as far as it will go, and then tighten the screws at the top of the cover.
3
Insert and tighten the four screws to the bottom of the cover.
4
Reconnect all cables on the back of the printer.
5
Plug in the printer power cord.
6
Turn the printer on.
Installing and removing options
Removing memory and option cards
23